Extendable table ventilation, when not in use can be completely lowered into the worktop

Dimmable, warm white LED light for ideal illumination of the whole cooktop

Precision crafting of 3 mm stainless steel

For surface mounting with a visible edge or for flush mounting

Can be combined perfectly with other Vario appliances of the 400 series

Maximum air output in combination with remote fan units s. table remote fan units on page xxx.

Sound power level depends on the built-in situation.

3 electronically controlled power levels.

Intensive mode.

Interval ventilation.

Run-on function.

Grease filter saturation indicator.

Cartridge-type filter, dishwasher-safe.

LED light.

Spare covers for closing air outlets.

No connecting piece included.

For operation with 3 Vario 400 series cooktops or cooktops up to 122 cm wide.

Max. output of cooktops 18 kW.

In combination with the cooktops CE/CI 490, installation in 60 cm deep worktops is possible.

Operation of Vario cooking appliances only possible without appliance cover.

Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.

If the remote fan unit is installed within the bottom cabinet and if combined with VK or VF ensure accessibility to the outlets.

The remaining surface of the worktop (min. 50 mm) between the cut-outs must be reinforced with a support. It is recommended to use furniture support AA 409 400/430.

Ovens that do not exceed the maximum allowed cabinet temperature can be combined with the table ventilation if built-in situation permits.

Recommendation for stainless steel parts to match hood that have to be welded and polished: brushed grain 280.

Surfaces: Stainless steel 1.4301, ground and brushed IIIC.

For air recirculation:

The exhaust outlet in the plinth should be as large as possible to minimise draughts.

The location of the exhaust outlet in the plinth is consumer-defined. Minimum cross-section 720 cm².

To avoid smoke when frying/grilling refer to the manuals of VR/VP.

For air extraction:

For maximum exhaust air line use Gaggenau flat duct system AD 8… or Naber-System Compair flow. Other flat ducts are not permitted!

Duct connection front or backwards: 2 ducts DN 150 cylindrical or flat rectangular duct. Downwards 2 ducts DN 150 flat rectangular duct (installation accessory).

When installing a ventilation hood with air extraction mode and a chimney-vented fireplace, the power supply line of the ventilation appliance needs a suitable safety switch.