Skip to main content
GAGGENAU LOGO
AI480180

Product is no longer available

More information and services related to this product

1 / 4
Photo Nr. 1 of the product AI480180
Photo Nr. 2 of the product AI480180
Photo Nr. 3 of the product AI480180
Photo Nr. 4 of the product AI480180
Photo thumb Nr. 1 of the product AI480180
Photo thumb Nr. 2 of the product AI480180
Photo thumb Nr. 3 of the product AI480180
Photo thumb Nr. 4 of the product AI480180
Photo thumb Nr. 1 of the product AI480180
Photo thumb Nr. 2 of the product AI480180
Photo thumb Nr. 3 of the product AI480180
Photo thumb Nr. 4 of the product AI480180

Technical Overview

Color body
Stainless steel
Material body
Stainless steel
Built-in / Free-standing
Built-in
Fan levels
3 power levels and 1 intensive mode
Air output extraction (intensive)
1530 m³/h
Width of appliance
180 cm

Specifications

Two ducts, each with one individual fan
Air extraction or recirculation system, consistent extraction over the full width
1530 m3/h output
Operation from both sides
Dimmable Soft-Light
Control panel in the front and the rear.
3 electronically controlled power levels.
Intensive mode.
Interval ventilation.
Run-on function.
Grease filter saturation indicator.
Cartridge-type filter, dishwasher-safe.
Dimmable halogen Soft-Light 4 x 20 W.
For calculating the exhaust air line go to Rodun online at www.gaggenau.com.
For maximum exhaust air line use Gaggenau flat duct system AD 8… or Naber-System Compair flow. Other flat ducts are not permitted!
When installing a ventilation hood with air extraction mode and a chimney-vented fireplace, the power supply line of the ventilation appliance needs a suitable safety switch.
A large drop in output and significantly increased noise can be expected in the air recirculation mode in the case of ventilation hoods with a very high air output.
Vario cooktops with intensive production of vapours like VR/VP/VF should be placed in the middle beneath the hood (in this case air recirculation is not recommended).
Clearance above electric appliances min. 55 cm.
Side outlet only directly under the ceiling.
Fit the socket concealed behind ventilation duct.
Note the air lines of the two ducts.
Two people are needed for installation.
Recommendation for stainless steel parts positioned nearby that have to be welded and polished: brushed grain 280.
Surfaces: Stainless steel 1.4301, ground and brushed IIIC.
The dimensions of the air ducts refer to a distance of 1.60 m from the floor to the bottom edge of the hood. Convert for other installation heights: Worktop height + minimum clearance + hood with duct.
Total connected load 600 W.
Connecting cable 1.3 m with plug.

Manual and Documents

Technical Overview
Specifications
Manual and Documents

island cooker hood Stainless steel